Mon May 23, 2022 - National Edition Hitachi

Hitachi Construction Machinery Americas Inc. (HCMA) announced the arrival of the ZX50U-5N excavator, a compact machine with full-size features.

With its reduced tail-swing design, the compact, yet powerful, 10,560-lb. (4,790-kg) ZX50U-5N is perfect for working in congested areas. An independent swing boom and 360-degree rotation let you set up and work almost anywhere. Plus, virtually unlimited visibility and precise control make it a great tool for excavating around existing utilities.

This excavator is a smart choice for trenching, excavating, loading trucks and other tasks in wide-open spaces, according to the manufacturer.

The ZX50U-5N offers plenty of height and reach to get up and over truck sideboards with a maximum reach of 19 ft. 7 in. (5.96 m). It also provides a maximum dig depth of 11 ft. 7 in. (3.53 m). A backfill blade allows the excavator to fill or grade while an optional all-hydraulic blade angles 25 degrees left or right, for even more efficient grading and backfilling.

Compact excavators are commonly used as tool carriers with a wide range of attachments increasing job site versatility. A standard quick-coupler-equipped, boom-mounted auxiliary line makes attachment hookup on the ZX50U-5N a snap. An auxiliary function lever (AFL) is available with an analog switch, trigger switch and horn for running attachments such as a breaker or an attachment with swing.

The ZX50U-5N allows the engine speed to be matched to the job with power/economy work modes, which are usually only available on larger excavator models. The power mode provides higher engine speeds for most general digging work, while the economy mode reduces engine speed for lighter digging jobs. This results in lower noise and decreased fuel consumption.

The excavator also uses the Hitachi Triple H (HHH) hydraulic system, which enables combined operations by adjusting the optimal flow rate for all actuators. This gives the operator the freedom to provide simultaneous control inputs with no impact on machine performance.

A Tier IV Final compliant, direct-injected Yanmar engine produces 36.3 net hp (27.1 kW) while remaining fuel efficient and impressively quiet. The engine provides a high torque level for more pull-through power.

Just because the ZX50U-5N can squeeze into a tight space doesn't mean the operator should. A spacious operator station has a wide entryway. Swing boom and foldable travel pedals are positioned where they are easy to operate yet allow plenty of foot room.

Ergonomic short-throw hydraulic pilot control levers provide smooth, predictable low-effort fingertip operation to reduce operator fatigue. To suit operator preference and increase productivity, control patterns can be quickly switched from backhoe- to excavator-style controls with a control-pattern selector located in a compartment beneath the seat.

An enhanced 3.5-in. LCD monitor keeps the operator informed of vital information while allowing fingertip control of several functions, including auto-shutdown and power/economy modes.

Comfort inside the spacious cab has been maximized with an automatic, high velocity, bi-level climate-control system with automotive-style adjustable louvers to help keep the glass clear.

The ZX50U-5N is built to the same durability standards as larger Hitachi excavators. Oil-impregnated HN bushings are used on the boom, arm and bucket joints for increased durability. Heavy-duty X-frames provide a rock-solid base that resists material and dirt buildup. A single-pin swing post increases the structural integrity of the digging components.

The rubber tracks on the ZX50U-5N feature a unique steel core that resists cracking. Large-diameter drive sprockets and track idlers further increase undercarriage durability.

A V-shaped cylinder guard provides added protection to the boom cylinder. To prevent damage to the upper structure, a D-section frame skirt improves upward impact resistance by 20 percent over previous models, according to the manufacturer.

Compact machines can be more challenging to maintain, but not with the ZX50U-5N. A hinged door provides wide-open access to the side-by-side oil cooler and radiator core for easier cleanout. Routine checks, such as engine oil level, are quickly accomplished from ground level. A hydraulic fluid sight gauge and see-through coolant reservoir allow the operator to check at a glance.

Adjusting proper track tension only requires a grease gun and a wrench. A large fuel tank, 500- and 2,000-hour engine and hydraulic oil service, and 500-hour greasing intervals enable these excavators to work long hours between scheduled service intervals.

The operator station tilts forward 50 degrees, simplifying access to the swing motor, hydraulic control valve, engine starter motor and alternator.

To reduce the cost of repair, the traditional curved glass used in the cab has been exchanged with more easily obtainable flat glass.

For more information, visit hitachicm.us.

OPEI Welcomes Record Numbers to Equip Expo 2022 in Louisville

Lengthy Long Island Expressway Project Smoothly Proceeds

Great Lakes Construction Co. Cleans Up Mentor Marsh

Micron to Build Mammoth $31B Semiconductor Chip Plant Near Syracuse, N.Y.

ConExpo-Con/AGG Helps Illustrate Where Construction Industry is Going

Avant Artic Loaders Prove Adept With Snow Removal

Mid Country Celebrates 25th Anniversary With Open House

Huber Maintainer Introduces Its New M-850-E Maintainer

Construction Equipment Guide 470 Maryland Drive Fort Washington, PA 19034 800-523-2200

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Read our privacy policy here.