Sandvik has added a new loader to its rapidly expanding Toro™ family, with the Toro LH307.

In addition to featuring a multitude of design updates and new options to both hardware and software, the Toro LH307 loader also carries more tonnes than its predecessor, the 6.7 t Sandvik LH307, with the new model’s payload capacity increased to 7 t when equipped with the standard 3 cu.m bare lip bucket.

Among the new options designed to improve productivity are, for example, the Sandvik integrated weighing system IWS and traction control, both already available for the larger Sandvik loaders. The integrated weighing system measures the payload when lifting the boom, as well as the number of buckets filled during a shift, and records the results to My Sandvik Digital Services Knowledge Box™. Payload monitoring assists in maximising productivity by optimising loads, reducing overloading and helping to identify training needs. The traction control system reduces wheel slippage when penetrating to the muck pile and filling the bucket, extending tire lifetime and decreasing rubber waste.

As part of upgrading the 7 t loader, specific attention has been applied to digitalisation readiness. The loader has benefitted from control system upgrades, including 7 in touch screen colour display for the operator as standard.

The loader has been designed for use with AutoMine®, Sandvik’s advanced mining automation system for increased safety, productivity and reduced cost. AutoMine integration can be achieved by ordering an optional on-board package for the new loader for immediate autonomous use, or by selecting the automation-readiness option, allowing easy retrofitting of AutoMine later in the loader’s lifetime. Sandvik OptiMine®, also available as an option, delivers descriptive and predictive insights to improve operations and data analytics.

To serve varying customer and country specific needs, two 160 kW engine alternatives are available, both from Volvo Penta. The standard engine is an 8-litre EU Stage III A, capable of operating on diesel fuels with up to 3,000 parts per million sulphur content, whereas the optional EU Stage IV requires ultra-low sulphur diesel fuel.

The Stage III A engine also has an optional passive diesel particulate filter exhaust reduction system. To reduce emissions and consumption of fossil fuel, both engines can also use paraffinic fuel, thereby meeting EN 15940 requirements.

International Mining Team Publishing Ltd 2 Claridge Court, Lower Kings Road Berkhamsted, Hertfordshire England HP4 2AF, UK

Tel: +44 (0) 1442 870 829 Fax: +44 (0) 1442 870 617 Email: [email protected] or [email protected]